We will send You commercial offer, if it will be needed we will contact You

Rigid gas flue systems

Rigid gas flue system
Almeva STARR rigid gas flue systemAlmeva STARR rigid gas flue system

Couldn't choose or don't want to fill long order forms? Just Contact Us:

  • West Lithuania: +370 699 74 658
  • East Lithuania: +370 680 30 285
                            or +370 699 27 714
  • info@kaminai.com
-OR- Ask a question

Chimney system parts

Chimney system parts varies according to the situation. The main components of Almeva gas flue system STARR:
  1. Pipe with socket;
  2. Tee with inspection door;
  3. Connecting Tee;
  4. Condensation trap;
  5. Elbow.
Additional Documents given with chimneys system:
  • Declaration of performance;
  • Warranty Certificate.


Almeva - Serves to drain combustion gases from condensing and low-temperature boilers.

Chimney highest temperature of combustion gases on the socket of the flue of the appliance 120 oC.

It is designated primarily for pressure and high pressure combustion gas routes (Pressure inside the chimney liner is during operation much higher than outside). It can also be used for chimneys with natural draught.

It is not designated for combustion gas routes where the burning of ashes can occur.

It is suitable for chimneys that are according to plan operated in wet operating mode.

Usable only for combustion gas routes from appliances burning gas fuel, precisely ground gas (L, H) and liquid fuel (LTO with the contents of sulfur ≤0,2 %, kerosene).

Consists of PPH rigid pipes and blocks DN 60 – 315 mm and accessories, and is designated primarily for interior and as liners in straight chimney flues, connection with socket connectors with EPDM seal.


This website uses cookies to ensure you get the best experience on our websit. If You accept cookies from this site, press "Got It!", you will still be able to change it by changing browser settings and deleting created cookies.Got it!